Find Stockist

Introduction

Simplyaquaria Temperature Controller module

This controller can be used for precise temperature regulation in aquariums and will control both heating and cooling devices such as heaters and chillers/cooling fans. 

 

Note - this is a panel mounted DIY controller module and will need to be wired and mounted in a cabinet by end user or suitably qualified individual.

Features

• Temperature Calibration facility.
• 16A Heating Control (max resistive load 1840W).
• 16A Cooling Control (max inductive load max 500W).
• Temperature differential setting range: 0.1°C - 10.0°C (Elitech E1000 only 0.5 minimum).
• Adjustable compressor delay between switching heating/cooling to prevent short cycling.
• Display permanently lit to enable easy viewing of temp status.
• 2m plastic coated sensor.

Specifications

Dimensions
Front panel size: 75mm(L) × 34.5mm(W)    
Mounting size: 71mm(L) × 29mm(W)
Product size: 75mm(L) × 34.5mm(W) × 85mm(D)
​
Specifications

  • Temperature measuring range -50°C ~ 99°C
  • Temperature differential range 0.1°C ~ 10.0°C
  • Compressor delay range 1 ~ 10 mins.
  • Temperature calibration range -10°C ~ 10°C
  • Display Resolution: 0.1°C
  • Accuracy: ± 1°C
  • Power supply: 220VAC±15%, 50/60HZ
  • Temp Sensor: 1 x 2 metre NTC sensor
  • 16A Heating Control (resistive load, such as heater) max 1840W
  • 16A Cooling Control (inductive load, such as a chiller) max 500W
  • Operating Temperature Range: 0°C ~ 60°C
  • Operating Humidity range: 20% ~ 85%
  • Power consumption: 3W
  • Power off memory function: Settings retained when power lost
  • Product Code TC225 
D-D DIY Temperature control module

Downloads

PDF icon tc225manual DIY.pdf

Related Articles