Find Stockist

Introduction

Smart ASOV Flood Guardian

The Flood guardian is an electronic shutoff unit for your RO.

Never worry about forgetting to turn off your RO/DI system or overfilling your reservoir again.

No unreliable float valves, simply mount the magnetic sensor on to your RO reservoir then the solenoid valve inline between the prefilters and RO membrane. When the water reaches the sensor the solenoid valve will be shutoff turning the water supply off to the RO membrane.

With normal shutoff systems for RO units water is topped up as soon as the level in the reservoir drops by a few millimeters. This prevents the RO unit from flushing properly, as it is constantly being turned on and off, leading to TDS creep. With the use of a household timer the Flood guardian can be set to turn on every 1-7 days as needed to fill the reservoir in one go flushing the RO unit properly and preventing this creep in TDS levels.

As the unit uses a magnetically mounted optical sensor so you do not need to drill holes in your RO resevoir or container and allows the sensor to be moved easily if required.

 

Features

  • Prevents floods when making RO water
  • Installs & uninstalls in seconds
  • Magnet mounted optical sensor, no tools needed
  • Dual-optical sensor for double security
  • Can easily be moved from one reservoir to another
  • Controller shows operation status

Specification

  • Power input: 100-240 VAC 50-60 Hz
  • Cable length of power adapter: 6 ft (180 cm)
  • RO solenoid valve :
    • 6 W @ 12 VDC
    • 1/4 inch RO tubing connection
  • Max. sensor mounting thickness : 1/2 inch (12.7 mm)
  • Length of cable between sensor and controller : 10 ft (300 cm)
  • Cable length of solenoid valve : 4 ft (120 cm)
  • Note - Not recommended for use with booster pumps 

 

 

 

SASO-200V Instruction Manual