Deltec TS1250 Turbo Skimmer

The Turbo Skimmers contains a chamber for placing of Rowaphos and carbon, which slides in and out of the skimmer and is part of the skimmers construction.

High contact time is achieved by spinning the aerated water as it leaves the pump head.

By placing it directly in the sump it is very efficient, with low energy use as it requires no extra pipe work or pumps to operate or to drive water through it.

The unit is fitted with the same high efficiency pinwheel system as the rest of the Deltec skimmer range.

Simply place in the sump for plug and play set up on this model of skimmer.

Technical Data

• TS1250 Skimmer : Article No. 89001
• Single pump model.
• Stands directly into the sump.
• Draws its own water from the sump via the internal needlewheel pump.
• Sump water level - min - 100mm - max - 150mm (4-6 inches)
• 350 litres of air/hr are produced at the venturi.

Dimensions: 

• L 260mm W 125mm H 540mm - 10.25 x 4.9 x 21.25 inches (normal position).
• H 580mm - 23 inches (allowing for removal of the cup).

 Stocking:

• Normal Stocking 750 lts - 166 UK gallons - 200 US gallons
• Heavy Stocking 500 lts - 111 UK gallons - 130 US gallons