Deltec TS1060S Turbo Skimmer

It contains a chamber for placing of Rowaphos and carbon, which slides in and out of the skimmer and is part of the skimmers construction.

High contact time is achieved by spinning the aerated water as it leaves the pump head.

By placing it directly in the sump it is very efficient, with low energy use as it requires no extra pipe work or pumps to operate or to drive water through it.

The unit is fitted with the same high efficiency pinwheel system as the rest of the Deltec skimmer range.

Simply place in the sump for plug and play set up on this model of skimmer.

Technical Data

• TS1060S Skimmer : Article No. 89003
• Three pump model.
• Stands directly into the sump.
• Draws its own water from the sump via the internal needlewheel pumps.
• Sump water level - min - 120mm - max - 180mm (4.8 - 7 inches)
• 1050 litres of air/hr total are produced at the venturi.

Dimensions: 

• L 380mm W 220mm H 605mm - 15 x 8.7 x 23.8 inches (normal position).
• H 640mm - 25.2 inches (allowing for removal of the cup).

• Normal Stocking 2250 lts - 500 UK gallons - 600 US gallons
• Heavy Stocking 1500 lts - 333 UK gallons - 400 US gallons